wood chippers in NZ

How to use a wood chipper machine

It is important to use wood chipper correctly to obtain the best results. Most owners assume that a wood chipper is a tool that can eat wood regardless of its throwing. This is not the case-a wood chip must be properly and respectfully handled. I will teach you in this article how to use a wood chipper and give you some tips on how to ensure that you get again the best results from wood chippers in NZ .

Some of you may have electric wood chippers, and that is why it is important to know how to use these devices correctly. Such small machines work well with plenty of twigs, leaves, brush and stick to clear the back yard. Most people don’t realize that using these devices is key to the successful operation of the system using the right calculation of the electric extension cord.

Electric extension cord.

wood chippers in NZ

It must be 12 gages if you have an extending cord between 50′ and 100′ This is because the electrical current is affected by a lower voltage that causes the engine to malfunction. Some of the owners of these chippers complained of the lack of power in the motor and accused it of poor construction of the system, whereas the real reason their machine is poor power is the incorrect extension cable. The engine ultimately burns out as a result of not using the right gauge extension cable.

Running your electric chipper from a standard wall plug. When you run your electric chipper from a standard wall plug, make sure that no other equipment shares the socket, as the other equipment will once again shape the full force of the current. This applies in particular to appliances like a refrigerator or a washing machine.

If you prepare your wood chipper for a job, make sure it is placed on a flat floor so that the machine is stable and does not move around. Make sure you still have plenty of space to feed unhindered waste.

Feeding branches into your machine

It is important to know how to use a wood chipper when feeding branches into your machine. The first thing to keep in mind is that the branches are not coated with wet leaves, because they can block the blades of the machine. If the pile of debris that you want to chip is watery, keep it dry until another day.

Another explanation for the jamming of chippers, especially cheaper models, is the introduction of old wood that has fallen off and charged too much for the blades. The best type of wood is a relatively fresh kind.

Leaves Do your chip/mulcher continue to jam when it feeds its own leaves? If so, it was found that if mixed with sticks or twigs, they would go through better. It gives the blades something stable to stand on when the material is handled.


It is important to know how to use a wood chipper when feeding wood into the tool. You should do this slowly, and let the blades of the computer take and draw the blades, instead of pushing the branches into and clamping insides. It is best to do this with a good pair of protective gloves.